webinar

Boost your knowledge and skills with ADVANCE Design Connection free webinars!

/ Łukasz Jędrzejewski / Leave a comment

REGISTER HERE

If you’re a structural engineer looking for powerful steel connection design software, then make sure you tune into our free Advance Design Connection week.

Boost your knowledge and skills with Advance Design Connection free webinars! Advance Design Connection Week is a series of webinars dedicated to BIM Workflow based on Graitec products!

About Advance Design Connection

Advance Design Connection is a powerful analysis solution for 3D Steel connection, fully integrated with Advance Design which is a global structural analysis software including a powerful 3D climatic generator, advanced stability checks and steel members design and optimization. Advance Design Connection can design all types of 3D connections using internal forces on members coming from Advance Design. It provides precise checks, results of strength, stiffness and buckling analysis of a steel joint. Joints are checked according to Eurocodes and North American codes (EC & AISC). Templates for most-used connections are available as well as wide range of predefined hot rolled and sheet welded members.

Join Advance Design Connection Week – free webinars which will be held in English and French.

During the webinars we will cover the following areas:

  • The workflow from Advance Design to Advance Design Connection –

In this webinar we will demonstrate how to export several connections of a steel structure which is modelled and analyzed in Graitec Advance Design (AD), to Graitec Advance Design Connection (ADC) software. You will see the automatic mapping procedure of sections and as well imported internal forces from AD. In the next step, we will create the connection geometry in ADC and run the analysis and code check process. Finally, we will go through the results of the analysis and status of the connection in ADC.

  • The workflow from Melody to Advance Design Connection – 

We will show the export of a real building attachment calculated with Advance Design to Advance Design Connection (ADC). Then the export of tubular structures from Melody portal to Advance Design Connection. In Advance Design Connection where we will automatically retrieve the profiles and the efforts of Advance Design or Melody, we will build the fasteners in a few minutes and exploit the results.

  • The workflow Advance Design +Advance Steel to Advance Design Connection – 

This webinar will cover the full workflow of steel connection design using Graitec Advance Design (AD), Autodesk Advance Steel (AS) and Graitec Advance Design Connection (ADC). First, we will export the structural node from AD to AS to transfer the sections, the geometry of the connection will be modelled in AS and exported to ADC. Then we will demonstrate how to import internal forces directly from AD into ADC.

  • The new version of Graitec Advance Design connection (ADC 20.1) – 

The new version of Graitec Advance Design connection (ADC 20.1) will be released soon. In this presentation we will focus on new features and functionalities of the new version. Some of the highlights are: Cost estimation  /   Pre-design tool   /   Check of missing welds

REGISTER HERE

Why is it worth participating in Advance Design Connection Week?

  • No marketing – 100 % practice 
  • Knowledge provided by professionals
  • Examples of effective usage of software
  • Priceless knowledge gained for free

Advance Design Connection Workflows:

  • ANY TOPOLOGY

No limits in how many connections there are in the joint and how they are put together. Shape is defined by project requirements, not by software capabilities

  • ANY LOADING

All forces are analyzed. The overall check of the joint takes into account interactions between all the beams and connections. Engineers stay on the safe side all the time.

  • IN MINUTES

The whole design and check process is kept short enough to be a part of everyday work of structural engineers and fabricators all around the world.

Save the date and register to Advance Design Connection Week!

REGISTER HERE

Watch the video – Analyse and Design Complex Steel Connections using Graitec Advance Design Connection

Free webinar: Link to Excel from Revit

/ graitecgroup / Leave a comment

Discover how you can bi-directionally link a schedule from Revit to Excel with the GRAITEC PowerPack for Revit!

As you may know, having the ability to bi-directionally link a schedule from Revit to Excel has always been extremely difficult and limited.

But with the linking tool in Revit, the user can now export a schedule from Revit and maintain a link to the file, giving the user the ability to make non-dimensional changes to the excel sheet and have the Revit parameters automatically update.

Join us on the 13th January 2017 at 3:30pm for a free webinar and learn about the Link to Excel feature and more in the GRAITEC PowerPack for Revit.

Find out more and register

GRAITEC December AEC Webinars

/ graitecgroup / 3 Comments

Increase productivity and learn a number of key features that can be implemented into new year project workflows.

Graitec Revit PowerPack – Link to Excel Webinar – With the Linking tool in Revit, the user can now export a schedule from Revit and maintain a link to the file, giving the user the ability to make non-dimensional changes to the excel sheet and have the Revit parameters automatically update. Join us on this this webinar to learn about this feature and more.

Date: 16th December 2016
Time: 10:00 AM – 11:00 AM

Date: 16th December 2016
Time: 4:00 PM – 5:00 PM

Find out more & register

BIM for Housebuilders – Revit LT vs. 2D Webinar – This webinar will introduce users to working in a more intelligent way. Replacing lines, and circles with ‘real-world’ components that interact with its surrounding environment. We will also look at the benefits of modelling the whole building rather than working on isolated areas, which can introduce potential errors.

Date: 16th December 2016
Time: 2:00 PM – 3:00 PM

Find out more & register

Architectural Metalwork Masterclass in Advance Steel (Webinar) – Register today to get an insight into how Advance Steel can be utilised for architectural metalwork detailing with a particular focus on using glazed components within the stair structure.

Date: 21st December 2016
Time: 2:00 PM – 3:00 PM

Find out more & register

Click here to head over to our events page and discover what upcoming webinars are taking place in January.

Reinforced Concrete BIM Designers Webinars

/ graitecgroup / Leave a comment

Two upcoming FREE webinars exploring RC BIM Designers for Revit® and how they use BIM data to design 3D reinforcement.

Webinar | Next-gen Reinforced Concrete BIM Designers for Revit

GRAITEC upcoming construction & BIM webinars

/ graitecgroup / Leave a comment

Autodesk Advance Steel & Plant 3D workflows, Revit Lt Vs. 2D, BIM for Infrastructure and Revit 360 collaboration – Register today!

 

Advance Steel and Plant 3D Workflow Webinar

This webinar will focus upon the interaction between Autodesk Advance Steel and Autodesk Plant 3D. Learn how existing plant structures can be used as a reference and then transferred to Advance Steel for additional steelwork to be added.

Explore the options to link your Advance Steel model with your plant project.

Webinar Host: John Bennett

Date: 21st September 2016

Time: 4:00 PM – 5:00 PM BST

Click here to find out more and to register!

 

Revit LT vs. 2D Webinar

This webinar will introduce users to working in a more intelligent way. Replacing lines, and circles with ‘real-world’ components that interact with its surrounding environment.

We will also look at the benefits of modelling the whole building rather than working on isolated areas, which can introduce potential errors.

Webinar Host: Simon Dickinson

Date: 22nd September 2016

Time: 10:00 AM – 11:00 AM

Click here to find out more and to register!

 

BIM for Infrastructure Webinar

This session will look at the workflows between early concept through to finished design; as well as focusing on the advantages of using Infraworks and Civil3D.

Ian Robinson will highlight the ease of looking at different design options using real-world data such as georeferenced data. This will allow the user to consider potential issues such as flooding.

Webinar Host: Ian Robinson

Date: 23rd September 2016

Time: 10:00 AM – 11:00 AM

Click here to find out more and to register!

 

Revit 360 Collaboration Webinar

This webinar will look at the new cloud subscription service that enables users to centralise their models via. The cloud.

The tool will keep all parties connected in real time using the communicator tool.

Webinar Host: Simon Dickinson

Date: 28th October 2016

Time: 10:00 AM – 11:00 AM

Click here to find out more and to register!

Free webinar: how to boost productivity and shorten project life cycles when detailing stairs & railings

/ graitecgroup / Leave a comment

Discover how Advance Steel boosts productivity and shortens project life cycles when detailing stairs & railings on our free webinar!

Register today to get an insight into how the software can be utilised for architectural metalwork detailing with a particular focus on using glazed components within the stair structure.

Discover how Advance Steel boosts productivity and shortens project life cycles when detailing stairs & railings on our free webinar!

Join our technical specialist to see how we can use the Advance Steel toolset to add a glazed staircase complete with customised sections for the stringers and glazed panels for the railing components. In this masterclass we will show the key modelling techniques involved and how to get the best from the software.

The webinar will conclude with a Q&A session with our technical specialist.

Webinar Host: Nial Ball
Date: 30th August 2016
Time: 10:00 AM – 11:00 AM

 

Register your place today!

Learn about the benefits of BIM in your Construction Industry Sector!

/ graitecgroup / Leave a comment

BIM for Housebuilders

This webinar will focus on the benefits of using BIM in the residential industry, including how government mandates may affect this sector. We will also look at a pilot project that shows the benefits achieved on a small scale housing development. The session will include a presentation and live demonstrations.

Key areas of focus include:

  • Understanding the Government mandate for 2016 and 2025
  • Key drivers of BIM
  • Automated information
  • Intelligent modelling
  • Working with the supply chain.

Date: 21st March 2016
Time: 10:00 AM – 11:30 AM

Register your place today!

BIM for Infrastructure

This session will look at the workflows between early concept through to finished design; as well as focusing on the advantages of using Infraworks and Civil3D. Ian Robinson will highlight the ease of looking at different design options using real-world data such as georeferenced data. This will allow the user to consider potential issues such as flooding.

This web demonstration will cover:

  • Early design with Infraworks
  • Looking at different initial options for roads, plots, and bridges
  • Understanding the workflow between Infraworks and Civil3D
  • Working with real-world design rules for roads
  • Automating data and live sectioning

Date: 1st April 2016
Time: 10:00 AM – 11:30 AM

Register your place today

BIM in Local Governments

This webinar will focus on the government mandate, and how this affects local governments. Gareth Spencer will talk about working internally on products (discipline to discipline), as well as working with external consultants/contractors. In this session he will also introduce the documentation required from local government to external consultants.

Topics covered will include:

  • Understanding the Government mandate for 2016 and 2025
  • Working with central models within Local Government
  • Sharing data with external consultants
  • Achieving repetition work internally
  • Automated information
  • Working with external consultants

Date: 11th April 2016
Time: 10:00 – 11:30 AM

Register your place today!

An array of AEC and MFG webinars taking place at Graitec!

/ graitecgroup / Leave a comment

Protect your benefits - renew your Autodesk Maintenance Subscription today!

Graitec Ltd are running a number of free informative online webinars during October which all last approximately 90 minutes. If you are in the AEC or MFG industry then join us for one or more of these and bring along any software questions you may have.

To find out more on each webinar, head over to GRAITEC UK website and take a look at the events page.

Manufacturing Webinars

Autodesk Vault Professional 

Become an expert on everything to do with ‘bills of materials’ aka BOMs in Autodesk Vault Professional.

-> Date: 1st October 2015, 10 – 11:30am

-> Date: 27th October 2015, 10 – 11:30am

Autodesk Inventor 

Learn all about the advance shape description tool set (T-Spline technology) in Autodesk Inventor.

-> Date: 1st October 2015, 3 – 4:30pm

-> Date: 27th October 2015, 3 – 4:30pm

Autodesk Product Design Suite

Find out about the different Autodesk software programmes in the Product Design Suite and how they
fit in with Digital Prototyping.

-> Date: 16th October 2015, 3 – 4:30pm

-> Date: 19th October 2015, 3 – 4:30pm

Nastran In – CAD

Register for our Nastran In-CAD webinar and learn about simulation using design optimisation.

-> Date: 16th October 2015, 10 – 11:30am

Architectural, Engineering and Construction Webinars

Vehicle Tracking for BIM

Learn about key tools and features of the Autodesk Vehicle Tracking Software and how this can help you with comprehensive transportation analysis and design.

-> Date: 23rd October 2015, 3 – 4:30pm 

Infraworks 360 for BIM

Create, view, analyse and manage information using Infraworks 360. Learn about the tools and features of this software and how it integrates and assists with BIM.

-> Date: 23rd October 2015, 10 – 11:30am 

Revit Energy Analysis

Revit Energy Analysis is a cloud service where you can compare estimated energy and lifecycle costs. Learn all about this service in our free webinar.

->Date: 26th October 2015, 3 – 4:30pm 

Navisworks for BIM

We will be going over BIM Co-ordination, interoperability enhancements, real time navigation, measurement tools and much more in our Navisworks for BIM demo.

-> Date: 26th October 2015, 10 – 11:30am

BIM Software

Join us for this exclusive webinar and learn how the impressive breadth and depth of the Autodesk AEC Portfolio can help with the BIM Process.

-> Date: 19th October 2015, 10 – 11:30am 

(BIM) Building Information Modelling

BIM is transforming the way organisations work. In this webinar learn all about building information modelling, as well as the 2016 UK Government BIM Strategy.

-> Date: 21st October 2015, 3 – 4:30pm

Cross Industry Webinar

AutoCAD

In this webinar we will be going over numerous features of AutoCAD as well as what’s new in the 2016 software.

-> Date: 21st October 2015, 10 – 11:30am

 

Register your place on one of Graitec’s webinars today by clicking the button below and filling out the events form. 

Register Today

Webinar Autodesk Advance Steel

/ graitecgroup / Leave a comment

Webinar Advance Steel

Webinar Autodesk Advance Steel

Advance Steel is built to automate and accelerate the structural steel detailing and fabrication process. Advance Steel 2016 requires the AutoCAD 2016 platform!

Structural steel modeling

  • Intelligent features for modeling any type of metallic structure;
  • Intuitively created structural elements;
  • Extensive library of objects and powerful tools to help designers create structural elements: trusses, bracings, purlins, portal frames.

Miscellaneous steel modelingMiscellaneous steel modeling

Customizable documentation for more efficient fabrication

Customizable documentation for more efficient fabrication

  • Ready-to-use templates that aid the creation of high-quality shop drawings;
  • Shop drawing templates are automatically labeled and dimensioned;
  • Shop templates can be easily customized according to your needs;
  • Easily created Bills of material (BOMs), where the quantities are defined by the parts used in the information-rich model.
  • Automatically generated files for CNC machines.

Interoperable for maximum efficiency between processes

Interoperable for maximum efficiency between processes

Added benefits with GRAITEC PowerPack for Advance Steel

  • Through the GRAITEC PowerPack extension, Autodesk Advance Steel users benefit from additional functionality and working tools, which help accelerate the whole detailing and fabrication process:
  • New joint types
  • New drawing styles and templates for BOMs
  • Databases with profiles, bolts, gratings, etc.

Find out more about GRAITEC Powerpack

GRAITEC Advance PowerPack

 

Register for Advance Steel Webinar

 

Learn what Autodesk BIM and Manufacturing Software Can Do For Your Business

/ graitecgroup / Leave a comment

Autodesk Desktop Subscription - Pay As You Go Software

Learn what Autodesk BIM and Manufacturing Software Can Do For Your Business

Make the most of your Autodesk software and discover the revolutionary approaches targeted towards your business with our free informative webinars. 

Working with Intelligent Models using Revit  

This Webinar demonstration will introduce the differences between traditional drawing and intelligent production of drawings. We will cover the fundamentals of creating Architecturally biased drawings, showing efficiency gains and the ability to extract additional information with minimal work.

Date: Wednesday 17th December 2014 

Time: 11:00am to 12:00pm

 

Introduction to Inventor

Join us for this webinar to discover the pivotal manufacturing software, Autodesk Inventor and how it has aided an array of manufacturing companies to carry out or move into a digital prototyping workflow.

Date:  Monday 22nd December 2014 & Friday 23rd January 2015

Time:  15:00 – 16:00pm    

 

Vault Workgroup and Professional

Autodesk Vault Professional and Autodesk Vault Workgroup are product data management software tools that can help you track all your design data, enhance your work process and securely share your data with the extended organisation. Learn the advanced functionality and features of this software and learn to improve your design and manufacturing process.

Date: Friday 22nd December 2014 

Time: 10.00-11.00am 

 

Vault Basic

With Autodesk Vault Basic you can easily organise, manage and track data creation, manufacturing processes as well as engineering and construction teams.

If you are only just entering the world of Product Data Management then you will realise the potential of the software on your data whilst enjoying this webinar from the comfort of home/work place.

Date: Friday 23rd January 2015

Time: 10.00-11.00am

 

Click here to register and you wont miss out on these free learning tools that will enable you to gain further knowledge for you to implement into your business/industry.

Free Webinar in Polish: Advance Steel – Design of steel structures

/ graitecgroup / Leave a comment

The Advance Steel detailing software is built on the AutoCAD platform. The intelligent 3D modeling tools help you accelerate the accurate design and detailing. Speed up time to fabrication and construction with tools that automatically generate shop drawings and deliverables. The interoperability with Revit and Advance Design Building Information Modeling (BIM) software supports a more connected workflow.

Enjoy Robobat’s open sessions online service – i.e. free interactive workshops, conducted by experts and the Training Service Department of Robobat Poland, to discuss specific issues / problems with the functioning of Advance Steel.

Free Webinar in Polish: Autodesk Advance Steel - Design of steel structures

Date: December 16th, 2014, 10:00 (CET time)

Organizer: Robobat Poland

Location: online

Webinar language: Polish

Registration for individual sessions and participation rules are available on the Robobat Poland website: http://www.robobat.pl/szkolenia/sesje-on-line.html

Are you detailing with an extra level of intelligence?

/ graitecgroup / Leave a comment

Advance Steel: 3D modeling software for steel detailingAdvance Steel 2015 is here. Discover the solution for intelligent structural detailing and fabrication.

Advance Steel 2015 is specifically designed for structural steel detailers and fabricators who require professional and easy-to-use structural steel detailing software that is connected to a BIM workflow.

Join us on July 8th, 2014, at 9:00 a.m. PST for a short webinar on the power of Advance Steel.

During this webinar, you will get information such as:

  • Product overview
  • Live demonstration of the advanced, easy-to-use structural detailing tools
  • Questions & answers

Duration of the webcast: 30 minutes 

More information about Advance Steel

Autodesk has recently acquired Advance Steel software from Graitec, a provider of structural detailing software that supports steel detailing for the structural engineering and construction industry. Advance Steel enhances Autodesk’s current offerings for structural engineering and expands our portfolio of technology of Building Information Modeling (BIM) tools for structural detailing and fabrication.

Register now!

 

 

Free Webinars by GRAITEC US

/ graitecgroup / Leave a comment

Free webinars by GRAITEC US

Complete a Set of Drawings for Stairs and Railings under 20 minutes March 4
12:00 EDT
Advance Steel Quick Learning Curve for AutoCad® Users March 7
12:00 EDT
Graitec Structural BIM Vision – Synchronize Revit® – Advance Design – Advance Steel March 11
12:00 EDT
Complete a Set of Drawings
for Complex Plate Work
under 20 minutes		 March 14
12:00 EDT
Create a Complete Set of Drawings for Curved Stairs and Railings under 20 minutes March 18
12:00 EDT
Master Structural Steel Design with Advance Design March 21
12:00 EDT
Create a Custom Connections Template in Advance Steel March 25
12:00 EDT

>> Register online here
Register online

FREE webinar organised by GRAITEC Asia-Pacific, Mumbai Office

/ graitecgroup / 4 Comments

GRAITEC Asia-Pacific is organising a free webinar on 28th of February.

Advance Steel Release of Version 2013

Advance Steel

Advance Steel® is specifically designed for steel professionals who require easy-to-use BIM structural steel software for automating drawing creation, documentation and fabrication.
Topic: General overview – discover the software in 30 minutes
Short presentation of Advance Steel showing the advantages and the main features
Thursday, February 28th, 2013
⇒ 15:00 PM – 15.45 PM (Indian Standard Time) Register now!

Advance Steel webinars for Asia-Pacific

/ graitecgroup / Leave a comment

Advance Steel Release of Version 2013

Advance Steel

Advance Steel® is specifically designed for steel professionals who require easy-to-use BIM structural steel software for automating drawing creation, documentation and fabrication.

 

List of FREE webinars organised by GRAITEC Asia-Pacific, Singapore

 

1/ General overview: discover the software in 30 minutes
Short presentation of Advance Steel showing the advantages and the main features
Thursday, January 31st, 2013
⇒ 15:00 PM – 15.30 PM (South East Asia time)Register now!

 

2/ How to improve your productivity on steel detailing with Advance Steel
Discover a number of the features and enhancements in Advance Steel that increase your productivity
Thursday, February 14th, 2013
⇒ 15:00 PM – 15.30 PM (South East Asia time)Register now!

 

3/ How to generate automatic drawings, BOM lists and NC files in Advance Steel
How to easily generate and configure the 2D drawings, BOM lists and NC files from a 3D model in just minutes
Tuesday, February 26th, 2013
⇒ 14:00 PM – 14.30 PM (South East Asia time)

 

4/ Advance Steel easy to learn for AutoCad® users
You know how to use AutoCad? You can easily learn how to make 3D models in Advance Steel using theacad standard commands
Wednesday, March 13th, 2013
⇒ 15:00 PM – 15.30 PM (South East Asia time)

 

December free webinars

/ graitecgroup / Leave a comment

Structural Engineers, Steel and Concrete Detailers…

…Discover our Structural BIM suite!

Advance Steel: BIM software for structural steel engineering, detailing and fabrication

Advance Steel

Advance Steel® is specifically designed for steel professionals who require easy-to-use BIM structural steel software for automating drawing creation, documentation and fabrication.

1/ General overview: discover the software in 30 minutes

Thursday, December 6th, 2012

Register now!

⇒ 9:00 AM CET to 9:30 AM CET – Metric

⇒ 6:00 PM CET to 6:30 PM CET – Imperial

2/ StruCad® switchover to Advance Steel

Discover a number of the features and enhancements in Advance Steel that StruCad® customers require

Thursday, December 13th, 2012

⇒ 9:00 AM CET to 9:30 AM CET

⇒ 6:00 PM CET to 6:30 PM CET

Thursday, December 27th, 2012

⇒ 9:00 AM CET to 9:30 AM CET

⇒ 6:00 PM CET to 6:30 PM CET

3/ Multi user mode

We will show how the Advance Steel multi-user mode can speed up the modeling of your projects of steel structures and how several users can work at the same time on the same project with security.

Thursday, December 20th, 2012

⇒ 9:00 AM CET to 9:30 AM CET

⇒ 6:00 PM CET to 6:30 PM CET

Advance Steel: BIM software for structural steel engineering, detailing and fabrication

Advance Design: BIM software for FEM structural analysis including international eurocodesAdvance Design

Advance Design® is specifically dedicated to structural engineers who require professional and easy-to-use BIM solution for simulating and optimizing all their projects according to international design codes (latest European standards, American standards ACI and AISC).

1/ General overview: discover the software in 30 minutes

Tuesday, December 4th, 2012

⇒ 9:00 AM CET to 9:30 AM CET

⇒ 6:00 PM CET to 6:30 PM CET

2/ Dynamic and non-linear analysis in Advance Design

During this ½ hour presentation, you will discover all the possibilities of Advance Design to run advanced analysis on real projects, from the assumptions definition to the results postprocessing step: time history analysis, modal buckling, non-linear analysis, 2nd order effects…

Tuesday, December 18th, 2012

⇒ 9:00 AM CET to 9:30 AM CET

⇒ 6:00 PM CET to 6:30 PM CET

Advance Design free webinar                 Advance Design free webinar

Advance Concrete: BIM software for structural concrete engineering, detailing and fabricationAdvance Concrete

Advance Concrete® is specifically designed for structural engineers and reinforced concrete detailers who require professional and easy-to-use BIM software that automates the production of drawings, BOMs and NC files. Advance Concrete® drastically increases productivity and drawings quality, while reducing the risk of errors.

1/ Advance Concrete customization for your office standards

We will show you the ways to change the defaults of Advance Concrete according to your company standards: user preferences, project settings, representation styles for model elements, drawings and reinforcement objects (colors, hatches, line styles, …), fabrics and bars library, modify / create rebar and formwork symbols, modify rebar list templates, modify dimension styles, re-use the settings in new projects.

Wednesday, December 5th, 2012

⇒ 9:00 AM CET to 9:30 AM CET

⇒ 6:00 PM CET to 6:30 PM CET

2/ General overview: discover the software in 30 minutes

Wednesday, December 12th, 2012

⇒ 9:00 AM CET to 9:30 AM CET

⇒ 6:00 PM CET to 6:30 PM CET

Advance Design free webinar                 Advance Design free webinar

November free webinars

/ graitecgroup / Leave a comment

Structural Engineers, Steel and Concrete Detailers…

…Discover our Structural BIM suite!

Advance Design: BIM software for FEM structural analysis including international eurocodesAdvance Design

Advance Design® is specifically dedicated to structural engineers who require professional and easy-to-use BIM solution for simulating and optimizing all their projects. It includes a user-friendly structural modeler, an automatic load generator, a powerful FEM engine, comprehensive wizards for designing concrete and steel members, and efficient post-processing and report generators. Advance Design® implements the latest European standards, American standards ACI and AISC.

1/ General overview: discover the software in 30 minutes

Tuesday, November 6th, 2012

⇒ 9:00 AM CET to 9:30 AM CET

⇒ 6:00 PM CET to 6:30 PM CET

2/ The advanced post processing tools in Advance Design

We will show you the available post processing tools in Advance Design to make your project’s results post processing step more easy and efficient: isoregions, diagrams, result curves, stresses on sections… You will also see how you can update all the created documents in one click when changing the model using the “result memory” technology.

Tuesday, November 20th, 2012

⇒ 9:00 AM CET to 9:30 AM CET

⇒ 6:00 PM CET to 6:30 PM CET

Advance Design free webinar

Advance Steel: BIM software for structural steel engineering, detailing and fabrication

Advance Steel

Advance Steel® is specifically designed for structural engineers and steel detailers who require professional and easy-to-use BIM structural steel detailing software that automates the production of drawings, BOMs and NC files. Advance Steel® drastically increases productivity and drawing quality, while reducing the risk of errors. Advance Steel® can be used with or without AutoCAD®.

1/ General overview: discover the software in 30 minutes

Thursday, November 8th, 2012

Register now!

⇒ 9:00 AM CET to 9:30 AM CET – Metric

⇒ 6:00 PM CET to 6:30 PM CET – Imperial

2/ Advanced tools for miscellaneous steel

We will show different techniques when using Advance Steel for miscellaneous steel, from the 3D modeling to the automatic creation of all necessary documents for fabrication and erection.

Thursday, November 15th, 2012

⇒ 9:00 AM CET to 9:30 AM CET

⇒ 6:00 PM CET to 6:30 PM CET

Advance Steel: BIM software for structural steel engineering, detailing and fabrication

3/ Drawing customization

Advance Steel allows users to get high-quality drawings by using presentations delivered by default. We will show in this webinar how block titles and drawing styles can easily be customized to fit the company’s way of providing workshop and general arrangement drawings.

Thursday, November 22th, 2012

⇒ 9:00 AM CET to 9:30 AM CET

⇒ 6:00 PM CET to 6:30 PM CET

Advance Steel: BIM software for structural steel engineering, detailing and fabrication              Advance Steel: BIM software for structural steel engineering, detailing and fabrication

4/ StruCad® switchover to Advance Steel

Discover a number of the features and enhancements in Advance Steel that StruCad® customers require.

Thursday, November 29th, 2012

⇒ 9:00 AM CET to 9:30 AM CET

⇒ 6:00 PM CET to 6:30 PM CET

Advance Concrete: BIM software for structural concrete engineering, detailing and fabricationAdvance Concrete

Advance Concrete® is specifically designed for structural engineers and reinforced concrete detailers who require professional and easy-to-use BIM software that automates the production of drawings, BOMs and NC files. Advance Concrete® drastically increases productivity and drawings quality, while reducing the risk of errors.

1/ General overview: discover the software in 30 minutes

Wednesday, November 14th, 2012

⇒ 9:00 AM CET to 9:30 AM CET

⇒ 6:00 PM CET to 6:30 PM CET

See all the webinars organized for the rest of the year

October free webinars

/ graitecgroup / Leave a comment

Structural Engineers, Steel and Concrete Detailers…

Discover GRAITEC Structural BIM Suite

…Attend our free upcoming webinars!

Advance Steel: BIM software for structural steel engineering, detailing and fabrication

Advance Steel

Advance Steel® is specifically designed for structural engineers and steel detailers who require professional and easy-to-use BIM structural steel detailing software that automates the production of drawings, BOMs and NC files. Advance Steel® drastically increases productivity and drawing quality, while reducing the risk of errors. Advance Steel® can be used with or without AutoCAD®.

1/ General overview: discover the software in 30 minutes

Thursday, October 4th, 2012

Register now!

⇒ 9:00 AM CEST to 9:30 AM CEST – Metric

⇒ 6:00 PM CEST to 6:30 PM CEST – Imperial

2/ StruCad® switchover to Advance Steel

Discover a number of the features and enhancements in Advance Steel that StruCad® customers require.

Thursday, October 11th, 2012

⇒ 9:00 AM CEST to 9:30 AM CEST

⇒ 6:00 PM CEST to 6:30 PM CEST

Thursday, October 25th, 2012

⇒ 9:00 AM CEST to 9:30 AM CEST

⇒ 6:00 PM CEST to 6:30 PM CEST

3/ Advanced tools for miscellaneous steel

We will show different techniques when using Advance Steel for miscellaneous steel, from the 3D modeling to the automatic creation of all necessary documents for fabrication and erection.

Thursday, October 18th, 2012

⇒ 9:00 AM CEST to 9:30 AM CEST

⇒ 6:00 PM CEST to 6:30 PM CEST

Advance Steel: BIM software for structural steel engineering, detailing and fabrication

Advance Design: BIM software for FEM structural analysis including international eurocodesAdvance Design

Advance Design® is specifically dedicated to structural engineers who require professional and easy-to-use BIM solution for simulating and optimizing all their projects. It includes a user-friendly structural modeler, an automatic load generator, a powerful FEM engine, comprehensive wizards for designing concrete and steel members, and efficient post-processing and report generators. Advance Design® implements the latest European standards, American standards ACI and AISC.

1/ General overview: discover the software in 30 minutes

Tuesday October 9th, 2012

⇒ 9:00 AM CEST to 9:30 AM CEST

⇒ 6:00 PM CEST to 6:30 PM CEST

2/ Seismical analysis EC8

Discover how you can handle a seismical analysis according to EC8 with Advance Design: spectrum generation and modal analysis. During this ½ hour presentation, you will discover how you can benefit from dedicated tools in Advance Design to handle multi-material projects in seismical areas: automatic generation of seismical spectrum, behaviour coefficient definition, additional torsional eccentricity effects, results postprocessing per mode…

Tuesday, October 23th, 2012

⇒ 9:00 AM CEST to 9:30 AM CEST

⇒ 6:00 PM CEST to 6:30 PM CEST

Advance Design free webinar      Advance Design free webinar

Advance Concrete: BIM software for structural concrete engineering, detailing and fabricationAdvance Concrete

Advance Concrete® is specifically designed for structural engineers and reinforced concrete detailers who require professional and easy-to-use BIM software that automates the production of drawings, BOMs and NC files. Advance Concrete® drastically increases productivity and drawings quality, while reducing the risk of errors.

1/ General overview: discover the software in 30 minutes

Wednesday, October 10th, 2012

⇒ 9:00 AM CEST to 9:30 AM CEST

⇒ 6:00 PM CEST to 6:30 PM CEST

2/ Several ways to create reinforcement drawings

Thanks to Advance Concrete, discover different ways to create reinforcement drawings:

• Based on the 3D model elements with reinforcement styles
• Based on the 3D model without using reinforcement styles
• Create the rebar drawings based on a pure 2D drawing
• Rebar symbols, bending details and reinforcement lists

Finally we will create a 3D view of the reinforcement, run a clash check detection and place the reinforcement drawings on a layout.

Wednesday, October 17th, 2012

⇒ 9:00 AM CEST to 9:30 AM CEST

⇒ 6:00 PM CEST to 6:30 PM CEST

Free Webinar: Strucad switchover to Advance Steel

/ graitecgroup / Leave a comment

Steel detailers, Structural Engineers:
Discover the Powerful and Affordable Steel Detailing Software

Thursday, September 13, 2012 9:00 AM – 9:30 AM or 6:00 PM – 6:30 PM CEST

Register online to Advance Steel webinar

Advance Steel® is specifically designed for professionals who require an easy-to-use 3D structural steel detailing software that automates the production of drawings, BOMs and NC files.

Advance Steel® is part of the GRAITEC structural BIM solution, automating the entire structural design process, from engineering design to detailing and fabrication.

Trough this webinar we will demonstrate a number of the features and enhancements that Strucad customers require.

From the modeling of complex folded plates to the automatic creation & update of high-quality documents, Advance Steel can be used with or without the AutoCAD® platform and offers the flexibility and the productivity gain that you expect from steel detailing software.

Strucad switchover to Advance Steel webinar

Advance Steel TOP benefits:

1 – Advance Steel® 2012 allows users to use their software with or without AutoCAD®: the product includes its own graphics engine, and the user can select the desired CAD platform

2 – Short learning curve: reduces new employee ramp up time

3 – Specific features for miscellaneous steel and sheet metal: automatic functions for all type of stairs and railings, automatic tools for sheet metal creation, folded and twisted plates, etc.

4 – Precise and automatic creation and updating of construction documents: BOMs automatically created from the 3D model, revision control, revision clouds, drawing presentation template, automatic drawing scaling, paper formats and views, etc.

5 – BIM and collaborative work: DXF / DWG / Revit imports, multi-user technology, interoperability with major industry leading detailing / fabrication / engineering / MRP packages (CIS/2, SDNF, DSTV, KISS, etc.), etc.

6 – More Productivity with the flexible and efficient 3D modeling automatic tools: complete international catalogs, library of parametric joints, single or multi-user mode, etc.

GRAITEC Advance – September free webinars

/ graitecgroup / Leave a comment

Advance Steel: BIM software for structural steel engineering, detailing and fabricationAdvance Steel

Advance Steel® is specifically designed for structural engineers and steel detailers who require professional and easy-to-use BIM structural steel detailing software that automates the production of drawings, BOMs and NC files. Advance Steel® drastically increases productivity and drawing quality, while reducing the risk of errors. Advance Steel® can be used with or without AutoCAD®.

 
1/ General overview: discover the software in 30 minutes
Thursday, September 6th, 2012
⇒ 9:00 AM CEST to 9:30 AM CEST – Metric
⇒ 6:00 PM CEST to 6:30 PM CEST – Imperial
 
2/ StruCad® switchover to Advance Steel
Discover a number of the features and enhancements in Advance Steel that StruCad® customers require.
Thursday, September 13th, 2012
⇒ 9:00 AM CEST to 9:30 AM CEST
⇒ 6:00 PM CEST to 6:30 PM CEST
 
Thursday, September 27th, 2012
⇒ 9:00 AM CEST to 9:30 AM CEST
⇒ 6:00 PM CEST to 6:30 PM CEST
 
3/ ProSteel® switchover to Advance Steel webinar
Discover a number of the features and enhancements in Advance Steel that ProSteel® customers require.
Thursday, September 20th, 2012
⇒ 9:00 AM CEST to 9:30 AM CEST
⇒ 6:00 PM CEST to 6:30 PM CEST
 
———————————————————————————————————————–
 
Advance Design® is specifically dedicated to structural engineers who require professional and easy-to-use BIM solution for simulating and optimizing all their projects. It includes a user-friendly structural modeler, an automatic load generator, a powerful FEM engine, comprehensive wizards for designing concrete and steel members, and efficient post-processing and report generators. Advance Design® implements the latest European standards, American standards ACI and AISC.
 
1/ General overview: discover the software in 30 minutes
Tuesday, September 11th, 2012
⇒ 9:00 AM CEST to 9:30 AM CEST
⇒ 6:00 PM CEST to 6:30 PM CEST
 
2/ Steel and concrete design according to US codes with Advance Design
During this ½ hour presentation, you will discover how you can benefit from dedicated tools in Advance Design to handle steel and reinforced concrete projects: in a few clicks, you can design and optimize the steel and concrete members including buckling and lateral torsional buckling effects, sections optimization, concrete columns design, cracking analysis and get detailed reports with all intermediate values.
Tuesday, September 25th, 2012
⇒ 9:00 AM CEST to 9:30 AM CEST
⇒ 6:00 PM CEST to 6:30 PM CEST
 
———————————————————————————————————————–
 
Advance Concrete® is specifically designed for structural engineers and reinforced concrete detailers who require professional and easy-to-use BIM software that automates the production of drawings, BOMs and NC files. Advance Concrete® drastically increases productivity and drawings quality, while reducing the risk of errors.
 
1/ General overview: discover the software in 30 minutes
Wednesday, September 12th, 2012
⇒ 9:00 AM CEST to 9:30 AM CEST
⇒ 6:00 PM CEST to 6:30 PM CEST
 
2/ Formwork drawing and layout creation
We will show the creation of formwork drawings and layouts based on a model created with Advance Concrete in this webinar. One part of the webinar is the creation of dimensions and annotations with the focus on the Advance commands. Another topic is the drawing update process after some changes are made in the model. The last part is the creation of printable layouts with header and frames and finally assigning the created drawings to the layouts.
Wednesday, September 26th, 2012
⇒ 9:00 AM CEST to 9:30 AM CEST
⇒ 6:00 PM CEST to 6:30 PM CEST

A general schedule including the whole webinars which will take place until the end of the year is online on GRAITEC website: www.graitec.com/en/events.asp?Archive=&EventCategoryID=3