As part of an ongoing project Graitec UK have been working hard to improve the drawing styles in Advance Steel to give better results in more situations. It is a fact that different users desire different things and would draw the same things in different ways. Therefore, some degree of compromise is always required when delivering a set of style for universal use. However, we believe we have now been able to produce a set of styles and related drawing processes that will give clearer drawings in the vast majority of cases meaning far less manual editing is required. Furthermore the process of creating the drawings can be streamlined.
Key Benefits / changes of these styles (in no particular order):-
- Tried to reduce unnecessary views, including section views
- Tried to remove duplicate dimensions
- Tried to reduce unnecessary dimensions
- Where possible added dimensions that were missing
- Where possible, improved layout of dimensions to align with parts and not go across views
- 2 Special styles for Rafters – By default the processes use the style without the top view but there is one with a top view that can easily be selected or set in the process instead
- 3 Special FRAME styles – One dimensions the edges of beams and plates, one dimensions the system line for beams instead, one allows selection of extra cross-section views. The Assembly processes will use this style for any assembly where the main part has the model role FRAME. Thus things like whole balconies, plant rooms etc. can have a better automatic drawing
- Special style for Eaves Beam Brackets – Used automatically by Assembly processes
- Turned off Grid Reference in assemblies
- Improved clipping and scaling rules to produce better results for parts and assemblies
- New “All Assemblies A3-A1 Single – BOM” process to draw all assemblies without the need to preselect. (Don’t forget to set UCS for stair assembly views)
- New “All Parts A4-A1 Single – BOM” process to draw all parts without the need to preselect
- New Cameras processes – Versions for Anchor type, Overview type and All. Versions for each paper size. Can be used for any type of camera if you simply select the right type in the dialog that comes up after clicking USE in Quick Doc’s
- New Process Suite for “Everything” that uses “All Cameras Anchor A1”, followed by “All Cameras Overview A1” then “All Assemblies A3-A1 Single – BOM, and finally “All Parts A4-A1 Single – BOM”. Thus with this one process and suitably prepared cameras in your model you get the entire set of GA’s, Assemblies and part drawings in one step without preselecting anything (Don’t forget to set the UCS for Stair assembly views)
- New previews and descriptions in Quick Docs for the above items
- Adjusted Cladding style to include end view
Manchester Road Bridge in part of the Living Street Project, a lottery-funded project focused on the development of a suitable, convenient and safe route across Manchester Road, which will have the potential to visually enhance this important gateway into the city. This new walkway is a people-orientated, street environment that links up people with places using broad, high-quality, avenue-like routes for pedestrians and cyclists linking up residential areas, schools, shops, health care, parks and town center.
It is made of over 350 tonnes of steel, 210 meters long in total with two main spans over Manchester Road of 22 meters and 24 meters. It is supported by almost 100 piles buried into the ground carefully engineered to avoid underground services and Bradford Beck. At the central reservation dividing Manchester Road a 17m high rectilinear extension to the column forms a towering central feature which marks the visual centre of the bridge crossing.
GRAITEC
Civil Engineering Software Solutions 